WE ARE HERE

When was Roof moss removal near me of one’s building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as for example leaks, while some produce subtle signs which are only detectable at first glance. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your own building has any of the problems listed below, an organization that specializes in commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections whenever a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates an area where water can leak within the panels and soak the roof deck. Once the deck becomes saturated, the problem is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and allow water to seep beneath the bitumen. After the blisters form, warm weather typically makes them worse. Because of the humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is best solution. Through the rainy season, resolving ponding water is among the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as for example chimneys and vents. As time passes, most flashing must be resealed. If it’s not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have parts of missing mortar may cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that focuses on commercial roofing will reveal the true problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are some of the most common reasons for roof repair. When they are corrected early, most problems are cheap to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best way to ensure problems are detected early.